But sometimes one wants unique things happening at the corners. I recall that when I first drew the tenons on the left stretcher, they popped into view on the right stretcher.
CUTLIST PLUS FX FOR WINDOWS 10 HOW TO
But my question remains as I am very interested to learn how to make the ends of the stretchers different from each other.
Maybe this is not an optimal design because there isn’t much wood on the outside of the rear tenon, and I might change the vertical dimensions of the stretchers to separate the tenons from each other. I want this because otherwise the tenons at the right-rear of the table would be superimposed. I want the tenon as shown on the front of the stretcher (centered), but on the rear of the stretcher I want the tenon offset to the outside of the stretcher. The right stretcher shown is the case in point. If you look at the file attached you’ll see what I mean. I don’t have your personal email, so I’m attaching the previously referenced file here. If you want to send me your SKP file by PM, I’ll take a look when I get home from work. Since the tenons are used as reference, the mortise are perfectly aligned to the tenons. While I have it, I usually wind up drawing my own tenons.Īs for the mortises, they always come after the tenons so there’s no need to lay out the mortises.
There is the Tenon tool in the Wudworx toolset if you would rather use a plugin. You could also draw only half the rail and copy it, flip the copy and move it into place but I don’t think it saves much work if any. Some people will draw one tenon, then copy it to the opposite end of the rail and flip it but I’ve seen plenty of examples where they’ve made an error in the move and created problems and more work than they saved.
CUTLIST PLUS FX FOR WINDOWS 10 ANDROID
Free iPhone, iPad and Android viewer apps included Free Trial Download. Works for any rectangular material, including glass, metal, granite, fabric and plastic. The guidelines extend through the rail so you can use the Rectangle tool and click at the points where the guidelines appear. With CutList Plus fx on your PC, you can optimize layouts for plywood, lumber and other sheet materials. If Offset doesn’t work for the size of the tenon relative to the rail, or in the case of twin tenons or haunched tenons, I sometimes draw the first tenon and then place guidelines along diagonal opposite corners of the tenon. Keyboard shorcuts for Offset and Push/Pull along with double clicking for both tools makes the second tenon faster than the first and neither take much time.
Once you’ve done it on one end, orbit the camera around to look at the other end and repeat the steps. As for the tenons on the rail, if the shoulders on all four sides are the same width, you can use Offset on the end of the rail followed by Push/Pull for the length.
0 kommentar(er)
